Description
This Split Molding Style desk has a grain matched access panel that allows convenient equipment service. Design MFI #98341™
Specifications for this desk:
- Wood Species and Cut: plain sliced Red Oak.
- Veneer: AAA/A grade; book match; sequenced.
- Finish: Standard Honey Oak Stain; #35 sheen; open pore; low VOC precatalyzed lacquer.
- Construction: Laminate top and solid wood edge; Cabinet; monocoque shell; MDF and plywood substrates.
- Casters: Hidden 4" carpet casters.
- Options: Double cabinet with CPU; document camera drawer and rack; pocket doors; rollout keyboard; open LCD monitor mount; medium cable reservoir; dual locking rear access panels.
Interior Configurations
Shelf Cabinet, No Equipment
Shelves are held short for wire passage. Wiring access plate in floor. No rear access or venting. Casters or levelers as required.
| DCO-S No Doors |
|---|
| DCS-S Standard Doors |
| DCP-S Pocket Doors |
Shelf Cabinet, Designed for Equipment
Equipment cabinets with shelves are vented top and bottom and have a removable rear access panel to service equipment. A 7"x9" floor access plate in the rear floor makes floor access easy. Casters or levelers as required.
| DCO-SA No Doors |
|---|
| DCS-SA Standard Doors |
| DCP-SA Pocket Doors |
Rack Cabinet
Rack cabinets are vented top and bottom and have removable access panels to service equipment. A 7”x9” floor access plate in the rear floor makes floor access easy. Front and rear rack included.
| DCO-RA No Doors |
|---|
| DCS-RA Standard Doors |
| DCP-RA Pocket Doors |
Double Rack Cabinet
Rack cabinets are vented top and bottom and have removable access panels to service equipment. A 7"x9" floor access plate in the rear floor makes floor access easy. Front and rear rack included.
| DCO-RRA No Doors |
|---|
| DCS-RRA Standard Doors |
| DCP-RRA Pocket Doors |
Double Cabinet, CPU, and Rack
CPU and Rack cabinets are vented top and bottom and have removable access panels to service equipment. A 7"x9" floor access plate in the rear floor makes floor access easy. Front and rear rack included. Levelers or casters as required.
| DCO-CRA No Doors |
|---|
| DCS-CRA Standard Doors |
| DCP-CRA Pocket Doors |
Document Camera Drawer and Cabinet
The document camera drawer is above a cabinet. Equipment versions have rear access and venting. A 7"x9" floor access plate in the rear floor makes floor access easy. The document camera drawer locks. Levelers or casters as required.
| Small/Medium |
|---|
| DCS-DS Shelf Cabinet, Standard Doors |
| DCP-DS Shelf Cabinet, Pocket Doors |
| DCS-DRA Rack Cabinet, Rear Access Panel, Standard Doors |
| DCP-DRA Rack Cabinet, Rear Access Panel, Pocket Doors |
| Large |
| DCS-LDS Shelf Cabinet, Standard Doors |
| DCP-LDS Shelf Cabinet, Pocket Doors |
| DCS-LDRA Rack Cabinet, Rear Access Panel, Standard Doors |
| DCP-LDRA Rack Cabinet, Rear Access Panel, Pocket Doors |
Double Cabinet, CPU, Rack, and Document Camera Drawer
CPU and Rack cabinets are vented top and bottom and have removable access panels to service equipment. A 7"x9" floor access plate in the rear floor makes floor access easy. Front and rear rack included. The document camera drawer locks. Levelers or casters as required.
| Small/Medium |
|---|
| DCO-DCRA CPU and Rack Cabinets, No Doors |
| DCS-DCRA CPU and Rack Cabinets, Standard Doors |
| DCP-DCRA CPU and Rack Cabinets, Pocket Doors |
| Large |
| DCO-LDCRA CPU and Rack Cabinets, No Doors |
| DCS-LDCRA CPU and Rack Cabinets, Standard Doors |
| DCP-LDCRA CPU and Rack Cabinets, Pocket Doors |
Options
Desk Height Adjust
Go from 30" sitting height to 38" standing height in seconds. Quiet, smooth, and reliable. Unbalanced loads are not a problem. Easy to operate from a wheelchair.
| MLM-HDM4 4 Piston Lift |
|---|
| MLM-HDM6 6 Piston Lift |
Lectern Top Option
| DLT-A Slant Lectern Top |
|---|
| DLT-B Flat Lectern Top |
| DLT-C Split Lectern Top |
CPU Shelf
| M-SCPU External CPU Shelf |
|---|
Custom Desktop Lecterns
| Custom Desktop Lecterns |
|---|
Desktop Lecterns
| MPL-24 Open Back Lectern |
| MDSF-24 Open Back Desktop Lectern |
Top Edges
Solid Wood Edging for Cabinets
These custom top edges all add a solid band of hardwood around the top. This protects the top surface (veneer or laminate) and the solid edge is very durable. This pricing is for desks, credenzas, workstations, and cabinets.
| M-VE Veneer or Laminate Self Edge |
|---|
| M-CWE Per lineal foot, all standard profiles |
Eased Edge - Top View
Eased Edge -Side View
Waterfall Edge - Top View
Waterfall Edge -Side View
Bullnose Edge - Top View
Bullnose Edge -Side View
Traditional Edge - Top View
Traditional Edge -Side View
Cove Edge - Top View
Cove Edge -Side View
Reverse Bevel Edge - Top View
Reverse Bevel Edge -Side View
Self Edge
T-Mold Edging for Cabinets
This t-mold edge adds a durable plastic band around the top. This protects the top surface (veneer or laminate). The corners of the top have to be rounded. Available in a wide variety of colors and styles. This pricing is for desks, credenzas, workstations, and cabinets.
| M-TME Per lineal foot, T-Mold Edge |
|---|
T-Mold Edge - Top View
T-Mold Edge -Side View
Solid Wood Molding
Solid wood molding can be added to serve as a handrail or as decorative trim. Pricing is for profile shown. Other styles are available at an additional cost.
| M-CWM Per lineal foot, Custom Wood Molding |
|---|
Solid Wood Molding
